Home Know UsProductsClientsContact UsFeedback

 
 
 

Your Choice of Horizontal Axis Balancing Machines

 

Applications of Horizontal Axis Balancing Machines

Horizontal Axis Balancing Machines are used to detect the unequal distribution of mass around the rotational axis of the rotating components.
These machines are used in Automobile industry,Electric machines industry,pump industry etc.
Our Range of Products

Horizontal Axis Balancing Machines

 
             Types of Balancing Machines We Manufacture  
     
 
End Driven Machines
   
Belt Driven Type Balancing Machines.
   
 Measuring System Options For Balancing Machines.
 
     
    Horizontal Axis Balancing Machine  
     
 
Horizontal Axis Balancing Machine
Horizontal Axis Balancing Machine
Capacity 1 kg - 20,000 kg
Electronic & Computerized versions available
Max. job Diameter 500 mm to 3000 mm
 
     
  1] END DRIVEN MACHINES  
     
 
1. Krystal DynamicBalancing Machines are designed and developed after years of experience in this field.All models are manufactured under strict quality control at all manufacturing stages.
2. All these models are suitable for Balancing variety of components as well as for production balancing.
3. All types of components, i.e.Armatures,Crankshafts, Fans,Flywheels and all such rotating components can be balanced on these machines with properly designed balancing Fixtures.
4. These machines can be equipped with variety of measuring systems suitable for the application and depending on sophistication level required.
5. All Krystal make Balancing Machines meet relevant National and International standards like BIS,ISO etc.
 
     
 
FEATURES
Safety And Ease Of handling
Driven Methods Which Meet your Requirements.
Appropriate Electronic Unit For every Balancing problems
Suitable Type Of Readout System For Every Accuracy Requirement.


 
     
 
 
     
  • All KE Balancing machines are calibrated as per ISO 2953 - 1985 / BS 3852 - part -I - 1979 •  
     
  Technical Data KHB - Series.  
     
 
Models Unite KHB - 10 KHB -30 KHB-50 KHB-100 KHB-300 KHB - 650 KHB - 1T KHB - 2T KHB - 3T KHB - 7T KHB - 10T KHB - 20T
Weight of Job kg 0.5 - 10 1-30 2-50 3-100 10-300 6.5-650 10-1000 20-2000 30-3000 70 - 7000 100 - 10000 200 - 20000
Max. diameter of job mm 500 500 500 1000 1000 1200 1600 1800 2000 2400 2400 3000
maximum distance measured from coupling end to exteme bearing center mm 500 500 1200 1400 1400 1400 1650 1650 2400 3300 3300 5000
Minimum distance between bearing mm 50 75 75 90 110 200 350 350 500 560 560 660
Journal diameter mm 5-50 5 - 50 5 - 50 15 -80 20 - 120 20 - 120 25 - 140 30 - 160 35 - 200 55 - 300 55 - 300 70 - 350
Balancing speed of machine RPM 1200 700 700 600 500 350 - 700 300 - 600 250 - 500 250 - 500 200- 400 200 - 400 180 - 360
Drive motor HP 0.33 0.75 0.75 1.5 3 5 7.5 10 20 30 40 60
Acceleration capability (GD²n²) Kgm²n² 0.29 X 106 0.37 x 106 0.37 x 106 0.88 x 106 3.9 x 106 8.5 x 106 14.12 x 106 44 x 106 88 x 106 168 x 106 216 x 106 400 x 106
Minimum unbalance mass read gm 0.01 0.1 0.1 0.1 0.2 0.1 0.2 0.2 0.4 1 1 2
Maximum unbalance mass measured gm.mm 104 3 x 104 5 x 104 105 3 x 105 6.5 x 105 106 2 x 106 3 x 106 7.0 x 106 107 2 x 107
Minimum unbalance measured and microprocessor based models gm.mm 0.5 1.25 2.5 5 15 5 10 10 20 60 60 160
Minimum achievable unbalance (For maximum weight of rotor) microns or gm.mm
./kg
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
 
     
  End driven models are also available in computerised version with following salient features  
     
  Technical Specifications  
     
 
Models Unite KHB - 10 KHB -30 KHB-50 KHB-100 KHB-300 KHB - 650 KHB - 1T KHB - 2T KHB - 3T KHB - 7T KHB - 10T KHB - 20T
Weight of Job kg 0.5 - 10 1-30 2-50 3-100 10-300 6.5-650 10-1000 20-2000 30-3000 70 - 7000 100 - 10000 200 - 20000
Max. diameter of job mm 500 500 500 1000 1000 1200 1600 1800 2000 2400 2400 3000
maximum distance measured from coupling end to exteme bearing center mm 500 500 1200 1400 1400 1400 1650 1650 2400 3300 3300 5000
Minimum distance between bearing mm 50 75 75 100 100 150 350 350 500 560 560 660
Journal diameter mm 5-50 5 - 50 5 - 50 15 -80 20 - 120 20 - 120 25 - 140 30 - 160 35 - 200 55 - 300 55 - 300 70 - 350
Balancing speed RPM 1200 700 700 600 500 350 - 700 300 - 600 250 - 500 250 - 500 200- 400 200 - 400 180 - 360
Drive motor HP 0.33 0.75 0.75 1.5 3 5 7.5 10 20 30 40 60
Acceleration capability (GD²n²) Kgm²n² 0.29 X 106 0.37 x 106 0.37 x 106 0.88 x 106 3.9 x 106 8.5 x 106 14.12 x 106 44 x 106 88 x 106 168 x 106 216 x 106 400 x 106
Minimum unbalance mass read gm 0.01 0.1 0.1 0.1 0.2 0.1 0.2 0.2 0.4 1 1 2
Maximum unbalance mass measured gm.mm 104 3 x 104 5 x 104 105 3 x 105 6.5 x 105 106 2 x 106 3 x 106 7.0 x 106 107 2 x 107
Minimum unbalance measured gm.mm 0.5 1.25 2.5 5 15 5 10 10 20 60 60 160
Minimum achievable unbalance (For maximum weight of rotor) microns or gm.mm
./kg
0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5 0.5
 
   
     
     2] Belt Driven Type Balancing Machines.  
     
 
  GENERAL
1. Krystal Hard Bearing type, Dynamic Balancing Machines with Belt Drive are designed and developed after years of experience in this field.All models are manufactured under strict quality control at all manufacturing stages.
2. All these models are suitable for Balancing variety of components as well as for production balancing.
3. All types of components, i.e.Armatures,Crankshafts, Fans,Flywheels and all such rotating components can be balanced on these machines with properly designed balancing Fixtures. These machines are specially suitable for small components like armatures of Mixers,Hand tools etc.These are also suitable for production jobs as no mounting fixtures are required.
4. These machines can be equipped with variety of measuring systems suitable for the application and depending on sophistication level required.
5. All Krystal make Balancing Machines meet relevant National and International standards like BIS,ISO etc.
 
     
 
Belt Driven Type Balancing Machines
FEATURES
Highly Accurate
Minimum Setting Time, No Adaptors
Most suitable for small components
Sturdy And Versatile
 
     
 
 
     
 
Sr.
No
PARAMETER UNIT
MODEL
KHS-10
KHP-10
KHS-30
KHP-30
KHS-50
KHP-50
KHS-100
KHP-100
KHS-300
KHP-300
KHS-650
KHP-650
KHS-IT
KHP-IT
1
Weight of job
kg 0.2 - 10 0.3 - 30 0.5 - 50 1-100 3-300 6.5-650 10-1000
2
Max. diameter of job
mm. 250 500 500 800 800 1000 1200
3
Max. Distance between bearings.
mm. 500 1000 1500 2000 2000 2000 2400
4
Shaft diameter
mm. 5-50 5-50 5-50 15-80 20-120 20-120 25-140
5.
Balancing speed range(n)
RPM. 600-3000 500-2000 500-2000 400-1600 400-1200 300-1200 300-1200
6
Power of drive motor
HP. 0.33 0.5 0.75 1.5 3.0 5 7.5
7
Acceleration capacity (GD²n²)
kgm²n² 0.40x106 0.48x106 0.72x106 1.98x106 10.8x106 11.65x106 14.12x106
8
minimum unbalance mas read
gm 0.02 0.04 0.06 0.1 0.2 0.4 0.5
9
maximum unbalance measured
gm.mm. 104 3 x104 5x104 10 x105 3 x105 6.5 x105 106
10
Minimum unbalance measured
gm.mm. 0.25 0.5 0.75 2.5 5 10 15
11
Minimum achievable residual unbalnce (for max. Wt. of job)
microns or gm.mm. / kg 0.2 0.2 0.2 0.2 0.2 0.3 0.3
 
     
   
     
    Measuring System Options For Balancing Machines.  
     
 
MICROPROCESSOR BASED MEASURING SYSTEM
MICROPROCESSOR BASED MEASURING SYSTEM
ANALOG MEASURING SYSTEM FOR TWO PLANE BALANCING M/C
 
     
 
MEASURING SYSTEM FOR SINGLE PLANE VERTICAL BALANCING M/C.
ANALOG MEASURING SYSTEM FOR FAN BALANCING M/C. MEASURING SYSTEM FOR SINGLE PLANE VERTICAL BALANCING M/C.
 
     
 
 
     
 
COMPUTERIZED MEASURING SYSTEM
 
 
COMPUTERIZED MEASURING SYSTEM
 
     
 
 
     
   
 
Designed by : MID   Hosted by : GID   Promoted by : PBD